Asphalt Resources
Asphalt Cement
Bitumen Grade 60/70
60/70- 180kgs, 200kgs per drum
85/100- 200kgs per drum
APPLICATION
Bitumen grade 60/70 is a penetration-grade bitumen that is used for construction of roads, airports and other similar applications.
Recommended Spraying Temperature: 160-200, °C
Recommended Mixing Temperature: 140-160, °C
PACKAGING: Drums
Weight = 180 Kgs, Net
Weight = 200Kgs, Net
ASPHALT EMULSION
SS-1 Anionic Asphalt Emulsion
SS-1 anionic bitumen emulsion is emulsified asphalt containing minimum 57% bitumen. It is a low viscosity emulsion used mainly for prime coating in place of cutback asphalt.
APPLICATION
SS-1 is sprayed at ambient temperature at a rate of 0.50 to 1.00 liters per square meter. Generally, a rate of 0.7 liters per square meter is used.
PACKAGING:
Weight = 200 liters
Net Standard Drum Dimensions
Asphalt Emulsion
CSS-1 Cationic Asphalt Emulsion
CSS-1 cationic bitumen emulsion is emulsified asphalt containing minimum 57% bitumen. It is a low viscosity emulsion used mainly for prime coating in place of cutback asphalt.
APPLICATION
CSS-1 is sprayed at ambient temperature at a rate of 0.50 to 1.00 liters per square meter. Generally, a rate of 0.7 liters per square meter is used.
PACKAGING:
Weight = 200 liters
Net Standard Drum Dimensions
Oxidized Asphalt
Oxidized Bitumen 115/15
Oxidized Bitumen is a durable, water-resistant, flexible and chemically stable material. It is widely used as an anti-slip compound in the piling industry, for sound-dampening felts and under-carriage sealant in the automobile industry, for roofing felts and for electrical cable protection. It is also used in the manufacture of bituminous mastic for oil and gas pipeline joints. In the Philippines, it is also used for cement block joint sealers
APPLICATION
Oxidized Bitumen is broken up into small pieces and heated slowly to the application temperature of 220 to 250 and should be heated to temperature not exceeding 270.
PACKAGING:
20 kgs Box
45 L x 31 W x 18 H (cm)
Oxidized Bitumen 115/15
PACKAGING II:
16 kgs Blocks
PACKAGING II:
25 kgs Bags
CUTBACK BITUMEN
APPLICATION
Medium Curing cutback bitumen or MC 70 are used for sealant purposes, prime and tack coats, crack filling, and for mixing with gravel to patch holes in pavements.
PACKAGING: Drums
Quantity = 200 liters, Net.
Coldmix Asphalt
APPLICATION
Use to repair potholes on roadways, parking lots, jogging, bicycle and walking paths, driveways and other asphalt and concrete pavements.
PACKAGING: Drums
40kgs pail